elg rail products tech

Rail Products Tech Data

Technical Data

E-Leather has been tested extensively to determine the ultimate performance of the material. This confirms a factor of safety as high as 5 times above the specifications for some products.

Designed and developed to overcome the weaknesses of traditional leather and textiles, E-Leather is engineered to provide a range of materials that meet specific performance criteria.

PRODUCT DATA SHEET FOR SL4C7

TestsTest MethodTypical Values
Average thickness BS EN ISO 2589:2002 1.1-1.3mm
Width Measure on final inspection 1400mm ± 20mm
Softness IUP 36 ≥3.2
Colour measurement EL-LSTP-0004  
TestsTest MethodTypical Values
Bally flex BS EN ISO 5402:2002 Dry 50,000 cycles
Tensile strength BS EN ISO 3376:2002 * ≥10N/mm
Breaking elongation BS EN ISO 3376:2002 ≥ 20%
Abrasion Resistance
(Taber)
BS EN ISO 5470-1:1999 Part 1 CS10 Wheels, 1kg, 1000cycles no
worse than slight damage of finish
and min grade 3 colour change
TestsTest MethodTypical Values
Flammability BS5852-2:2006-Crib 7 Pass
Chrome VI DIN 53314 E <3mg/kg
pH EN ISO 4045 3.30~5.00
Formaldehyde DIN 53315 Part B ≤80ppm
Pentachlorophenol DIN 53313 (BLC ID-149) ND (<3mg/kg)
Azo Dyestuffs LMBG No B82.02-3 §35 ND (<30ppm)

* Procedure as per BS EN ISO 3376:2002, except it is not corrected for thickness as this is not applicable to E-leather

PRODUCT DATA SHEET FOR SL4C5

TestsTest MethodTypical Values
Average thickness BS EN ISO 2589:2002 1.1-1.3mm
Width Measure on final inspection 1400mm ± 20mm
Softness IUP 36 ≥3.2
Colour measurement EL-LSTP-0004  
TestsTest MethodTypical Values
Bally flex BS EN ISO 5402:2002 Dry 50,000 cycles
Tensile strength BS EN ISO 3376:2002 * ≥10N/mm
Breaking elongation BS EN ISO 3376:2002 ≥ 20%
Abrasion Resistance
(Taber)
BS EN ISO 5470-1:1999 Part 1 CS10 Wheels, 1kg, 1000cycles no
worse than slight damage of finish
and min grade 3 colour change
TestsTest MethodTypical Values
Flammability BS5852-2:2006-Crib 5 Pass
Chrome VI DIN 53314 E <3mg/kg
pH EN ISO 4045 3.30~5.00
Formaldehyde DIN 53315 Part B ≤80ppm
Pentachlorophenol DIN 53313 (BLC ID-149) ND (<3mg/kg)
Azo Dyestuffs LMBG No B82.02-3 §35 ND (<30ppm)

* Procedure as per BS EN ISO 3376:2002, except it is not corrected for thickness as this is not applicable to E-leather

Your login details have been used by another user or machine. Login details can only be used once at any one time so you have therefore automatically been logged out. Please contact your sites administrator if you believe this other user or machine has unauthorised access.